0769-23388351
Toggle Navigation
This product is a round ferrite magnet with countersunk screw holes. The reason why the countersunk holes are made is because the funnel-shaped shape is more beautiful than vertical holes in terms of aesthetics, and the plane will not protrude after the screws are installed. Secondly, it is designed so that it is very protective and will not cause the magnets to be damaged so easily. From the aesthetic point of view, it not only meets the user's vision, but also meets the user's use from the safety point of view.
Ferrites with countersunk holes, although not as magnetic as neodymium screwhole magnets, are much cheaper, and not easy to rust, high temperature resistant, and can be used with iron cases.
If you have a need for round countersunk magnets, the quality assurance and beautiful price of courage magnet manufacturers in China, welcome to consult us.
Typical drawings of circular countersunk magnets;
Relevant magnet with hole types;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
Have you ever seen such a small ferrite rectangle/block magnet? This is a ceramic ferrite magnet of 2mm in length, 1.5mm in width and 2mm in thickness, with black surface and Y30BH grade. It is suitable for all kinds of electronic parts, precision electronics and medical products requiring magnetism. If you are processing small, thin and flat ferrite permanent magnet suppliers, we will be a good choice for you....
This ferrite ring magnet is manufactured using high-temperature sintering technology, featuring an outer diameter of 8mm, a 3mm square center hole, and a thickness of 3mm....
To buy round ferrite magnets, welcome to contact Courage permanent magnet manufacturers in China, our company has many sizes of ceramic round, block, arc, hole ferrite magnets, factory direct sales, low price, welcome Inquiries from customers all over the world....
This is a radial 2-pole ferrite rotor magnet, the outer diameter is 9mm, the height is 10.4mm, the inner hole is oval, it has low cost, high temperature resistance, and the maximum surface magnetic field strength is about 1130 Gauss. Welcome to consult the sample and price....