0769-23388351
Toggle Navigation
Are magnets also used in mahjong machines? What is the main purpose of the magnets in the mahjong machine? What kind of magnets are used? I believe that many friends are paying attention. Today, the magnet supplier Courage Xiaofu will give a brief description of the Mahjong machine magnets.
Yes. There are 4 large diamond magnets or rectangles on the big iron plate of the mahjong machine. The main function is to flip the cards. The pole directions of the four magnets and the mahjong tiles are literally mutually exclusive, so that all the mahjong tiles are turned over. To have literally super.
In addition to this, there are also magnets on the shuffle wheel. There will be 3 or 4 magnets on the shuffling wheel; the magnets of the suction wheel are either black or strong; generally, black magnets are enough for small cards, and strong magnets are used for big cards. The main function of this is to attract cards. The pole direction of the magnet of the suction wheel and the mahjong tiles are literally attracted to each other, so that the mahjong tiles can be sucked up from the large plate and then transported away through the conveyor belt.
Summarize:
The magnet on the mahjong machine has two functions: 1. Flop or attract cards; 2. Travel switch.
If you have purchase demand for mahjong machine ferrite square magnets,, mahjong machine strong magnets, please contact our company, we can customize according to your requirements,
Similar articles;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....