0769-23388351
Toggle Navigation
Many magnet suppliers have added the word "cheap" to the product names (key words) they sell to meet the search needs of consumers. Today, we will introduce to you what are cheap neodymium magnets, what are the characteristics of cheap neodymium magnets, and how to buy cheap high-quality neodymium powerful magnets,
Cheap neodymium magnets with cheap keywords may not be cheap
We all know that neodymium magnets are rare earth magnets, and their material prices are relatively expensive. In order to meet the search needs of customers, many businesses add cheap to the product name, increase exposure and click, and it may not be cheap after consultation, which is possible.
What are the characteristics of cheap neodymium magnets
1. The performance level is low, and N28 and N33 may be lower than N35.
2. There are some defects in the appearance
3. Large tolerance range
4. The inventory time is long. For example, what we did for the customer before was not needed later.
How can we buy cheap and high-quality neodymium magnets?
The most important thing is to find a good magnet manufacturer, which is the most important. For the magnet industry, magnet manufacturers from China still have advantages. Note that it is magnet manufacturers rather than traders. Besides, the quantity of magnets purchased is large, and the price will be more affordable. The smaller the size of magnets is, the easier it is to process, and the price will also be cheaper. Our company has been established for more than 10 years. Customers are welcome to consult samples and quote.
Relevant neodymium magnet column;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....