0769-23388351
Toggle Navigation
Hall speed sensor magnet is mainly used in locomotive control system to provide necessary guarantee for vehicle driving safety. Its working principle is that when the rotating mechanism of the sensor rotates under the action of external drive, it will drive the permanent magnet to rotate. The magnetic field passing through the Hall element will produce periodic changes, causing changes in the output voltage of the Hall element. A stable pulse voltage signal is formed through subsequent circuit processing, As the output signal of the vehicle speed sensor.
What magnet is used for speed sensor?
Generally, injection molding magnets are used for automobile speed sensors, such as injection molding NdFeB multipolar rings, injection molding ferrite multipolar magnetic rings, and sintered ferrite radial multipoles, which are generally 4 or 8 pairs of poles (8 poles and 16 poles). We have produced magnets of these materials.
What specification is used for the speed sensor magnet?
There are many specifications. The magnet materials and magnetic force required by different customer groups are different. such as
1. D25.5 * 6.1 * 5.3/radial externally filled 4-pole, about 550 Gauss
2. Injection molded ferrite D24 * 16 * 5.65/diameter outer 8 poles
3. Radial externally charged 16 pole polished ferrite D16 * 10 * 9
……
The above is about the speed sensor magnet introduced by Xiao Fu. If you need to evaluate the price, please contact Courage (in China) for samples. We have many specifications, waiting for your consultation.
Relevant speed sensor magnet products;
Speed measuring magnet 24 pole 22.5 x 12 x 6.5mm
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....