0769-23388351
Toggle Navigation
I have also introduced some before injection molding NdFeB, including its advantages, physical properties, etc. It belongs to a molded magnet, with a temperature resistance of about 120-180 °C, generally multi-pole magnetization, and can do some more complex Shape, widely used in automotive motors, meters, sensors, household appliances, office equipment and other fields, some netizens asked whether the injection molding NdFeB manufacturers provide samples? Let's talk about this issue below.
Can injection-molded NdFeB manufacturers provide free samples?
The picture above is a sample of injection-molded NdFeB (4-pole magnetization), the surface can see shiny magnetic powder, but injection-molded ferrite magnets will not.
It is generally possible if the magnet manufacturer has ready-made injection-molded NdFeB specifications, but the probability is small. Like injection molding ferrite, injection molding NdFeB requires mold processing, and the market for injection molding NdFeB is much smaller than that for injection molding ferrite, and some can also be replaced by bonded NdFeB, so from the perspective of mold In addition, many customers of this type need to be customized, and they have signed a non-disclosure agreement with the magnet manufacturer, prohibiting other use, so most of them need to be paid by customers.
The above is the introduction about whether the injection molding NdFeB manufacturer provides samples. If you need to consult injection molding NdFeB samples, mold opening costs, and delivery time, please call and contact the Courage magnet manufacturer.
Injection-molded NdFeB magnet samples;
Radial 4-pole injection molded neodymium magnet rotor
Injection NdFeB Neodymium Ring Magnet[Picture Quote supplier]
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....