0769-23388351
Toggle Navigation
Proofing((make sample)) NdFeB arc magnets refers to testing before subsequent mass production, small-scale trial production, mainly for engineers to test and analyze whether the motor is running normally. Since the motor usually uses multi-piece tile-type magnets, for cost considerations, many purchasers will ask you how much does a NdFeB arc magnet cost for proofing?
How much is a piece of rare earth NdFeB arc magnet for proofing?
The price of neodymium arc-shaped strong magnetic steel is related to the magnet performance, size, temperature resistance and quantity you need. It is best to have formal drawings and complete data of the magnetic tile to facilitate our company to check the price.
Usually the cost of proofing is higher than the price of bulk, which is understandable. If the unit price of magnetic steel is 1 RMB, then 10 pieces of proofing cannot be 10 RMB, right? Our magnet manufacturers also need labor, material costs, startup costs, etc. The price for small quantities usually starts at 100 yuan (subsequent large quantities can be returned). If you have a few hundred pieces for proofing, the bulk price is also possible.
The price of a piece of NdFeB arc magnets is as small as one or two yuan（RMB）, and as large as hundreds of yuan. Welcome to consult our Courage Magnet Factory to give you a specific quotation.
The company can produce Large arc neodymium magnet, Small curved bread neodymium magnet, click to view more NdFeB magnetic tiles product display: https://www.dgcourage.com/zhuanti/neodymium-arc-magnets/
Neodymium arc magnet article introduction;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....