0769-23388351
Toggle Navigation
Last Friday, a customer came to us and asked us if we could make a small bonded magnetic ring with an outer diameter of only 2.8mm and an inner hole of 1.45mm. The magnetization method in the technical requirements of the drawing is to position a pair of radial pole magnetization. What does this mean? The following magnet manufacturers Courage xiaofu on this to a simple explanation.
The following figure is a drawing of bonded Ndfeb magnet with a pair poles magnetizing in radial direction
First of all, positioning, is a requirement for magnet magnetization, such as all along the diagonal magnetization, fixed parts fixed magnetic poles, general products have such requirements, a pair of radial poles is relatively good to understand, a pair of poles is 2 poles, that is, radial 2 poles magnetization.
The above is an introduction to magnetization of a pair of poles in the radial direction of the magnet positioning, More articles: https://www.dgcourage.com/xinwen/hyxw/
More magnet magnetization articles;
Internal and external magnetization of permanent magnets
Schematic Diagram of Permanent Magnet Magnetization Direction
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....