0769-23388351
Toggle Navigation
N38SH belongs to the high-temperature resistance grade of sintered neodymium iron boron (NdFeB) magnets, with a high magnetic energy product and a working temperature of 150 ℃. In addition to paying attention to its magnetic properties, some engineers also want to know its specific heat and thermal conductivity to improve calculation accuracy. Let's introduce it below.
The specific heat capacity of N38SH sintered neodymium iron boron is usually about 460 J/(kg · K), which means that for every 1 ℃ increase in temperature of a 1kg N38SH magnet, approximately 460 joules of heat need to be absorbed.
The following image shows the physical and mechanical properties of N38SH (tested at 20 ℃)
The typical thermal conductivity of N38SH sintered neodymium iron boron is about 7.6 W/(m · K), which is much lower than that of copper (about 400 W/(m · K)) and aluminum (about 237 W/(m · K)). Therefore, in high-speed motors or high-power equipment, it is usually necessary to use rotor cores, shafts, aluminum shells or heat dissipation structures to timely dissipate heat.
The above is the main content of the article. If your company needs to make samples, please consult 38SH magnet quotation. The delivery time is welcome to contact us through the online customer service of the website.
Other introductions about neodymium grade N38;
N38 Neodymium Magnet Surface Magnetic Field Strength Reference
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....