0769-23388351
Toggle Navigation
When it comes to magnets, many people mention their magnetic strength. So, are rubber soft magnetic strips (or sheets) particularly strong? Below, Fu from Karichi will answer this question for you.
Rubber soft magnetic strips generally have relatively weak magnetic properties; they belong to the category of ferrites with low magnetic performance, with a magnetic energy product of approximately 0.8–5.2 MGOe. Compared to other materials, such as neodymium-iron-boron magnets and ferrite magnets, the magnetic properties of rubber soft magnetic strips are significantly weaker.
Flexible rubber soft magnetic strip
How many gauss do rubber magnetic strips have?
The magnetic field strength of rubber soft magnetic strips is usually measured in gauss (Gauss). However, the magnetic field strength of rubber soft magnetic strips varies depending on factors such as the manufacturing materials, dimensions and magnetisation method. Generally speaking, the magnetic field strength of rubber soft magnetic strips is typically low, ranging from tens to hundreds of gauss, with the specific value depending on the strip’s design and material.
Soft magnetic strips are primarily used to provide a mild holding force in specific applications, such as securing lightweight objects or providing a gentle magnetic hold. If a magnet with strong magnetic properties is required, options include neodymium rare-earth magnets, samarium-cobalt magnets, ferrite magnets and others.
Relevant samples;
Flexible rubber self adhesive ferrite disc magnet D50 x 1.5mm
Flexible Rubber Magnet Block Rectangular 40mm x 35mm x 2.8mm
Fan Motor Flexible Ferrite Rubber Magnetic Tape 202.8x22x3.5mm
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....