0769-23388351
Toggle Navigation
Hard drive magnets, also known as disk drive magnets, are mainly used for mechanical hard drives. You may have some knowledge about them, and this article has compiled 6 common questions.
1. What material is the hard disk magnet?
The vast majority of magnets from mechanical hard drives (HDDs) are sintered neodymium iron boron (NdFeB) because the read and write heads of hard drives require high speed and precise positioning, so high-energy accumulation materials must be used. Friends who have disassembled the machine should know.
2. What is the magnetization method of hard disk magnets?
It is different from ordinary magnets in that the magnetic poles are not distributed on two surfaces, but on the same surface, for example, from left to right, gradually changing from N pole to S pole.
3. Will the hard disk magnet demagnetize?
Under normal circumstances, it is unlikely. Possible factors for demagnetization of magnets include exceeding the temperature resistance of the magnet, mechanical impact causing cracks, and strong reverse magnetic field impact.
Hard disk drive magnets [ image price sales ]
![Hard disk drive magnets [ image price sales ]](/static/upload/image/20260317/1773735720774120.jpg)
4. What can hard disk magnets be reused for?
Using the super strong magnet in the hard drive to make a homemade fish tank cleaner
Search for metal pieces that have fallen to the ground
Demonstrate magnetic levitation
Create magnetic storage tools
5. Is the hard drive magnet N35 grade?
The grade of hard disk magnets is usually higher, usually using N38 or above. Compared to standard N35 magnets, they have higher surface magnetic fields and stronger magnetic forces.
6. How to remove the strong magnet from the hard drive?
The magnet is attached to the base with glue. The method to remove the magnet is to use two pliers to break the two ends of the base, and the magnet will come out by itself. Do not pry it directly with a hard object, it will break. It can be loosened and detached by using a glue remover or heating.
The above is an introduction to several common questions about disk drive magnets. Hard disk magnets are usually customized in a curved shape. If you have other questions or need to know the price of a certain magnet, you can send us an inquiry.
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....