0769-23388351

Small Silver Magnets [Material Application Note]

Addtime:2025-07-21 10:50:23 Click:407

Small silver magnets are small magnets with a silver appearance, usually less than 10 mm in size. With their exquisite appearance and strong magnetic force, they are widely used in the interior or on the surface of various products. Today, Xiao Fu will give you a detailed introduction to them.


Silver ring magnet appearance picture

Silver magnet appearance picture


In terms of material, the most common type is neodymium iron boron magnets, which are currently one of the strongest permanent magnetic materials available. Even in small sizes, they can generate extremely strong magnetic attraction (far exceeding that of ferrite magnets of the same size). They are very hard but relatively brittle.


Small silver magnets may also be nickel-plated ferrite magnets. Ferrite itself is usually black or dark gray, and nickel plating also gives it a silver color. They are much weaker than neodymium magnets, but are very inexpensive and more corrosion resistant. If the magnetism does not feel very strong, it may be this type.


Less common are nickel-plated aluminum-nickel-cobalt or samarium-cobalt magnets, which have specific high-temperature or corrosion-resistant requirements and are generally not coated, accounting for a very small share of the small magnet market.


Typical dimensions of small silver magnets:

Circular: 2x1mm, 1x1mm, 3x1mm, 3x2mm, 4x2mm, 5x1.5mm, etc.

Block-shaped: F3x2x1mm, F5x2x1mm, F6x4x2mm…

Ring-shaped: D6xd3x2mm, D7xd1x1mm, D10x3x2mm…

Spherical, 3mm and 5mm in diameter are very common.


For applications, small silver magnets are mostly used in DIY crafts and model making. In electronic appliances, they are used in magnetic switches for protective cases/stands for mobile phones and tablets, sensors (such as Hall sensors), and magnet assemblies inside headphones and speakers. In home and office settings, they are used in fishing equipment, such as magnetic reels.


Note: When purchasing and selecting, it is necessary to confirm the size, shape (can be ring-shaped, circular, or square), tolerance (to avoid assembly issues), requirements for magnetic strength or suction force, or Gauss requirements.


Related small silver magnet samples;

5x2.5mm Rare Earth Small Round Neodymium Magnet

Super strong small flat neodymium magnet block 7.6x5x0.9mm

Tags:
MAGNET PRODUCT RECOMMENDATION

Tiny Ferrite Magnet Block Length magnetization 1x1x2.45mm

This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....

Small Ceramic Ferrite Block Magnet 7.4mm x 6mm x 5mm

7.4x6x5mm Ferrite Small Block Magnet Introduction,Material: Hard Ferrite (Ceramic),Shape: Block / Rectangle / Bar,Coating: No Coating,Grade (Chinese Stardard): Y30,Operating temperature: -40°C to 250°C,Delivery time: 7-15 days,Magnetization direction: thickness....

U shaped ndfeb magnets in the shape of the letter U

U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....

4 pole bonded ndfeb ring rotor magnet 16 x 5 x 20 mm

This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...

4 pole ring Injection magnet for pushrod motors 22 x 7 x 4 mm

This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...

Encoder radial 2-pole circular magnet 6x2.5 10x2.5 N35

This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....

1.5mm small inner hole multipole injection ferrite magnet ring

This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....

Tiny block neodymium magnet with zinc coating 1.5mm x 1.5mm x 3mm

This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....

WHAT ARE YOU STILL HESITATING? CONTACT US NOW!

CONTACT NOW