0769-23388351
Toggle Navigation
Need to buy encoder magnetic ring, looking for supporting Germany iC-Haus mcu chip magnetic ring, welcome to contact China Courage Magnet manufacturer, our company can provide related 62/64 poles, 126/128 poles dual code channel magnetic ring, Highly cost-effective.
The following is the introduction of our multi-pole magnetic rings suitable for use on German iC-Haus chips.
34.5mm x 25mm x 1.1mm
The ring is magnetized with 32 pairs of poles (64 poles), axially magnetized, rubberized magnetic material, with an outer diameter of 34.5mm, an inner diameter of 25mm, and a thickness of 1.1mm, which provides high signal accuracy and resolution, and is used in conjunction with the MU-150 chip from ICHAUS in Germany.
29mm x 15mm x 1.1mm
Axial 32 pairs of poles (64 poles) magnetized, rubberized magnetic material, 29mm outer diameter, 15mm inner diameter, 1.1mm thickness, provides high signal accuracy and resolution, widely used for speed measurement, position and angle measurement, used with IC-MU chip from ICHAUS, Germany.
49mm x 25mm x 2mm
Axial multi-pole 64 poles magnetization, rubber magnet + stainless steel bottom bracket composition, outer diameter 49mm, inner diameter 25mm, thickness 2mm, with Germany ICHAUS IC-MU200 chip use.
56mm x 38mm x 1.1mm
64-pair pole code disk magnet, outer diameter size 56mm, hole 38mm, thickness 1.1mm, of which magnet thickness 0.5mm, stainless steel bottom bracket 0.6mm, with light weight, high precision, high stability and vibration resistance, in the case of 64 pairs of poles, angular measurement up to 20bit (1,048,576 isometrics/revolution), with the German ICHAUS IC-MU chip. MU chip from IC-HAUS.
128 poles flexible ferrite magnet rings for encoders
65.1mm x 47.4mm x 1.1mm
64 pairs of poles magnetic code disk magnet, rubber ferrite + stainless steel bottom bracket composition, outer diameter size 65.1mm, inner hole 47.4mm, thickness 1.1mm, of which the magnet thickness of 0.5mm, stainless steel bottom bracket 0.6mm, has a light weight, thin thickness and other characteristics, can be adapted to dust, vibration, high temperature, oil, and other harsh environments, and the iC-MU series products with the use of the choice of incremental or When used with iC-MU series products, incremental or absolute measurement output modes can be selected.
85mm x 62mm x 1.8mm
It also adopts 126 poles and 128-pole magnetization, with similar characteristics as described above, and is suitable for use with ICHAUS' IC-MU200 chip.
If you are interested in our magnets communicate with us by email or online message on the website, tell us the size and quantity you need, thanks!
Browse more encoder multipole magnets: https://www.couragemagnet.com/motor-multipole-magnets/
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....