0769-23388351
Toggle Navigation
Counterbore (Sink hole) magnet, It is also called screw hole magnet, I believe you will not be unfamiliar, is a magnet with a counterbore, its shape can be circular counterbore, square counterbore, arc shaped counterbore, is also a kind of magnet used in the market. If you have the order demand of countersunk permanent magnet, please provide us with your specifications and other requirements for the convenience of price evaluation.
The advantage of using this kind of countersunk magnet is that you can fix it with screws where you want to fix it. It is often used in decoration and hardware processing plants. If it is used in decoration, it is usually combined with some materials for construction. Some of them are locked in the interior of the goods, which can not be seen from the appearance, but it has the function of magnetic absorption, which can absorb iron objects, such as key strings or It's small scissors, or it's used to hold photos. It's widely used. For example, for example, in home decoration, there are often wooden boards or wooden strips. As long as you drill a square hole in the wood, you can lock it inside, and then you can use it to absorb the paper photos or small tools you want to absorb, which is quite convenient.
Round counterbore neodymium magnet；
The utilization rate in the hardware processing plant is also quite high. Many hardware appliances or hardware products will want to increase the magnetic absorption function. Some use the powerful magnetic force of NdFeB magnet to absorb the finished products, and some want to increase the magnetic absorption function on the commodities. No matter what they are used for, they will be more attractive than the same type of products.
The counterbore magnets are basically axial magnetized. Their counterbores can be in N-pole or S-pole, depending on the customer. They can be used in combination with countersunk screws such as M4, M5, M6, and M8. Whether the counterbore is in N-pole or S-pole, the counterbore magnets can be used in pairs or mutually exclusive. That is to say, when you use two countersunk magnets, the counterbore surfaces can be mutually attractive, We can also repel each other.
We can provide you with counterbore magnets made of rare earth neodymium iron boron, ferrite and Smco materials. We look forward to inquiries from customers around the world.
More counterbore magnet machining cases；
Countersunk Rectangular Magnets
Small magnets with screw holes countersunk 8mm x 3mm
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....