0769-23388351
Toggle Navigation
Neodymium magnets, also called neodymium iron boron magnets, rare earth magnets, and powerful(strong) magnets, are one of the most commonly used magnet materials on the market. They have poor corrosion resistance and are often protected by electroplating. They can be made into circles, rings, squares, and rectangles. Cylindrical, arc, special-shaped and other shapes, the performance is N35-N52, if you need our company's quotation, you can send an inquiry. Our company is located in Dongguan, China, and has a price advantage in high performance.
Name of magnet: 30mm countersunk magnet block，Size: Length 30mm, width 10mm, thickness 10mm，Type: Permanent magnet, with countersunk magnet，Magnetization direction: 5mm thickness direction，Tension: about 6kg，Weight: 11.3g，Welcome to inquire about the price....
This product is a 0.4mm neodymium magnet, 0.4mm is the thickness, the diameter is 10mm, and it is magnetized in the thickness direction. It is an ultra-thin and powerful magnet. about 0.15kg pull, If you need a smaller diameter, such as 3mm 4mm 5mm, you can contact us to quote for you, provide samples, performance The grades can choose N35-N52....
This sample is a ring-shaped thin magnet with a thickness of only 2mm. The material is NdFeB and has a strong magnetic force. The specific size is 30mm outer diameter, 18mm inner diameter and 2mm thickness. It is suitable for cup caps, bottle caps, industry, electronics, instruments, Equipment and any place where a magnetic field needs to be generated...
Height 31.3mm arc sectioned neodymium magnet introduction; Manufacturer: Courage Magnet。Type of magnet: neodymium arc curved magnets。Magnet size: Curved magnet outer diameter 7.4, inner diameter 5, height 31.6, 90° See the drawing below...
This is a type of ring magnet with an outer diameter of 120mm, which belongs to the large size magnet series. The material is strong magnetic Ndfeb, the inner hole (straight hole) size is 70mm, the height is 7mm, the surface coating is nickel, magnetization through the thickness direction, the magnetic force is strong, the tension is not tested, the magnetic strength of the surface is about 3620 Gauss...
This product is a large-diameter ring magnet with a hole in the middle. The material is sintered NdFeB, the surface coating is zinc, and the magnetic ring is magnetized in the thickness direction. , N40, N42, N45, N48, N50, N52 and high temperature grades, support customer 10-200mm magnet outer diameter customization....
The round countersunk magnet is mainly used with screws. You can choose the size of the magnet, the size of the screw hole, the depth and the level of magnetic properties according to your actual needs. If you need our company to evaluate the price, please send us an inquiry for processing samples....
Introduction of small size ring neodymium magnet; Product name: Nickel-plated strong neodymium small ring magnet，Performance level: N35 (can be customized for higher performance)，Product size: 8mm diameter, 2mm thickness, 4mm middle hole...
This is a diameter of 3mm rare earth permanent magnet, diameter of 3mm, thickness (height) 6mm, cylindrical, surface nickel copper nickel coating, magnet weight 0.3g, can be axial or radial magnetization, according to your actual needs, axial table magnetic strength will be higher, radial magnetization is mainly used for toys, axial magnetization is mainly used for electronic products, piling,...
This product belongs to the 12mmm neodymium magnet series, the diameter of the product is 12mm, the thickness of 3mm, tolerance of ±0.05mm, sintered NdFeb material, is the strongest magnetic material at present, the surface magnetic strength is more than 2500 Gauses, depending on the performance level of the magnet you use,...
12mm Rare Earth Neodymium Round Magnet 12mm x 2.5mm, Tolerance: ±0.05mm, Surface magnetic field: 2100 gauss at the center, 2700 Gauss at the highest, Welcome Your inquiry....
This product is a rectangular neodymium magnet with two machined holes on the surface, screw holes, grade n35, nickel-plated surface, magnetized thickness, especially suitable for wood, industrial, mechanical equipment requiring fixed tape magnetism. This is a sample produced by Courage, a magnet supplier in China, for our customers. If you need to quote, please contact us with size, hole distance, etc....
To buy heavy magnets and small heavy duty magnets, of course, we need to find Chinese magnet manufacturers. Our company is located in Guangdong, China, and can provide you with high-quality, cost-effective heavy industrial powerful magnets, also suitable for fishing, large mechanical equipment. The size of this sample is 100x50x10mm, and the tolerance is within a reasonable range. We look forward to your inquiry....
Product Size: Tiny cylinder strong magnets, Magnet size: diameter 2mm, thickness 3mm，If you have wholesale and customized requirements for small cylindrical magnets, you are welcome to contact us for quotation and proofing....
This product is a customized square neodymium magnet with 2 countersunk holes. It is special. Generally, more than one hole is punched. The magnet grade is N40. The surface coating is nickel copper nickel. It is magnetized in the thickness direction. This type of magnet is very suitable for fixing Use, industrial use, personal projects can be....
The type uploaded today is a round countersunk strong magnet with a diameter of 50mm and a thickness of 20mm. If you want to know the price, please send us an enquiry and tell us some basic information, such as temperature resistance, magnetization direction, coating, performance grade, etc....
