0769-23388351
Toggle Navigation
Since most of the motor magnets (arc magnets) are bonded and fixed by multiple tile-shaped magnets, they need to be glued. So what kind of adhesive should be used? Which brand of adhesive is better? Let me introduce to you today.
The following glue for sticking motor magnets is recommended by Chinese netizens:
The sample picture above is a curved bread neodymium magnet
1、The name Good Brothers is known to all epoxy glues and glue sellers.
2. Henkel Loctite 326. It has the characteristics of fast curing and high bonding strength; its maximum filling gap is 0.5mm, its viscosity is 15000mpa•s, its shear strength is 19Mpa, its working temperature is -54℃~107℃, its initial curing time is 2min, and it is fully cured. The time is 12h. If spraying accelerator on the glued surface before use, it can further accelerate the bonding and at the same time enhance the bonding strength. After repeated experiments and tests, it has been shown that the various properties of Loctite 326 Yantai glue are satisfactory for use.
3. Use Loctite 326, first use loctite 755 Loctite cleaning agent, and then cooperate with Loctite 7649 accelerator for better effect. Mainly used for bonding rigid materials such as ferrite to electroplated metal parts of motors or speaker parts, and also suitable for bonding metal and glass.
4. Loctite's 638 glue, with 7694 accelerator.
5. Our ferrite magnets generally use Loctite AB two-component glue.
According to our understanding, 914 quick-drying epoxy resin adhesive, J63 two-component quick-drying adhesive, 714 silicone rubber, 502 quick-drying instant adhesive, etc. are mostly commonly used adhesives.
Dongguan Courage magnet supplier specializes in the production of various motor magnets (NdFeB arc magnets, ferrite arc magnets, injection magnets, bonded NdFeB magnets). If you need motor rotor magnets, please contact the website customer service.
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....